Open a system door and window processing plant, which system door and window processing equipment is required

Open a system door and window processing plant, which system door and window processing equipment is required.

1.CUTTING SAW

Take the best CNC ruler saw sold at present as an example: aluminum door and window CNC fixed ruler double-head precision cutting sawing machine is mainly used for door and window insulation bridge aluminum profile and curtain wall aluminum profile cutting, the use of CNC scale system control, cutting size accuracy, 45 degrees and 90 degrees two angle button automatic conversion, can achieve large-scale production and processing.

2.CORNER CONNECTOR CUTTING SAW

Take the commonly used heavy-duty corner saw as an example: aluminum doors and windows automatic heavy-duty corner cutting saw dedicated to the system door and window corner code cutting, manual only need to install profiles once, all processing machines automatically completed, digital display cutting quantity, high efficiency and cutting 3mm long corner code to ensure that there are no residual sharp corners.

3.END MILLING MACHINE

Take cost-effective mid-end milling as an example: aluminum profile end milling machine is suitable for a variety of system doors and windows aluminum profile end face milling, according to different profiles can adjust the height and position of the blade, high production efficiency, can be processed 4 to 6 profiles at a time.

4.CORNER CRIMPING MACHINE

The following sinking group angle machine is an example: aluminum door and window sink heavy-duty synchronous group angle machine is the production of high-grade system doors and windows of special equipment, suitable for corner structure system doors and windows 90 degrees angle connection. On the basis of the traditional synchronous group angle machine, the work surface is increased, and the internal positioning can be lowered to the work table, which is convenient for the material to be taken and released when the group corner is located.

5.COPY ROUTER MACHINE

High-speed single-axis shaped milling machine is mainly used for the system door and window drains, sheath holes, key holes, metal parts hole milling.

6.PUNCHING MACHINE

Mainly used for flat open system doors and windows of the gold parts mounting hole groove stamping.