Aluminum and PVC Profile End Milling Machine
Publish Time: 2020-09-02 Origin: Site
Aluminum and PVC Profile End Milling Machine
Product Details：
①Milling the end of the aluminum & PVC Profile.
②Used for Milling the end of the aluminum & PVC Profile.
③Completes special-shaped screw-connected transom profile end milling,milling different sections by change cutter.
④Pneumatic clamping and feeding system.The 35-90 degree slope end milling can be achieved by turning locating plate on the table.
Technical Parameter:
| Power Supply | 380V 50Hz |
| Total Power | 2.2KW |
| Motor Rev | 2800r/min |
| Air Pressure | 0.5-0.8MPa |
| Diameter of Milling Cutter Spindle | 32mm |
| Workable Journey | 0~320mm |
| Worktable Dimension | 500*350mm |
| Milling Cutter Height | 70mm |
| Motor Adjusrable Journey | 0~80mm |
| Contour Dimension | 780*880*1260mm |