Views:6 Author:Site Editor Publish Time: 2020-08-24 Origin:Site
The company modified the maintenance mode of glass machinery and equipment.
In order to make the maintenance of glass machinery and equipment more standardized carried out the following mode adjustment, in the daily maintenance mode has added regular maintenance.
一、The regular maintenance of glass machinery and equipment.
The regular maintenance of glass machinery and equipment is under the guidance of maintenance workers, by the operator of regular maintenance work, two shifts of production of glass machinery and equipment about 3 months maintenance once a month, dry grinding dust maintenance once a month.
The operating time is calculated to stop by 0.3 to 0.5h per unit of equipment complexity coefficient, depending on the structure of the equipment. Maintenance and requirements for heavy and rare equipment are specified separately.
Glass machinery and equipment maintenance work is done, can reduce the loss of down work and maintenance costs, reduce product costs, ensure product quality, improve production efficiency.
二、Daily maintenance of glass machinery and equipment.
Weekend maintenance is mainly operators in every weekend and holiday before the use of 1 to 2h equipment for more thorough cleaning, wiping and oiling, and according to equipment maintenance "four requirements" for inspection and evaluation, to be assessed.
2.Each class maintenance.
Maintenance requirements operating staff in each class production to do: pre-shift equipment parts of the inspection, and in accordance with the provisions of refueling lubrication.
Glass machinery and equipment in operation in strict accordance with the maintenance operating procedures for the correct use of equipment, pay attention to observe its operation, found abnormal to be handled in a timely manner, the operator can not be ruled out of the fault should inform the repairman maintenance.
And by the repairman in the "fault repair list" to make a good maintenance record. Before work with about 15min time to carefully clean, wipe equipment, and equipment status recorded in the shift book, for shift procedures.